SwitchAir Effective Cooling For Network Switches
SwitchAir has been designed to effectively cool network switches that are placed in 19″ Racks. The areas where these network switches are placed often means that the switches are ‘breathing’ hot exhaust air which can lead to the switch overheating or even failing. SwitchAir® provides a solution by channeling cold air from the front of the rack to the air intakes of the network switch. SwitchAir installs in minutes while your network switch continues service, and enables network switch core temperatures to drop within minutes of installation.
SwitchAir® works with most network switches, check our Compatibility List for which SwitchAir® unit is required. If your switch model is not listed please contact us with the switch model details.
Specifications |
- Chassis Depth = 229mm
- Channel Depth = 660mm
- Rail Depth = 676mm – 752mm
- Input Power = 90-264VAC 50/60Hz 15 watts
- LED Power Indicator
- Input Connector = C14 Input
- Airflow = 47 CFM
- Safety / Approvals = UL, cUL 60950, CE, FCC Class A
- Warranty = 2 Years
Specifications |
- Chassis Depth = 457mm
- Channel 1 Length = 457mm
- Channel 2 Length = 660mm
- Input Power = 90-264VAC 50/60Hz 15 watts
- LED Power Indicator
- Input Connector = C14 Input
- Airflow = 188 CFM
- Safety / Approvals = UL, cUL 60950, CE, FCC Class A
- Placed above network switches, delivers cool air to side intakes in the network switches below.
- Warranty = 2 Years
The post SwitchAir Model Range appeared first on EDP EUROPE.